Loading up 7!15
Luggage compartment
Luggage compartment cover*
The luggage compartment cover
! serves to protect objects that are
stored in the car's luggage compart!
ment from prying eyes,
! prevents smaller objects from pene!
trating into the passenger compart!
ment from the storage space area, how!
ever it is not intended to act as a load
restraining device.
Fitting the luggage compartment cover
! Place the rear rod in the left and right
sides of the side panelling mount (A).
! Pull the front rod between mount (A) and
mount (B) upwards first and then for!
wards.
! Place the front rod in the left and right
sides of the side panelling mount (B).
! Attach the rear end of the cover with
the velcro strip to the back of the rear
bench seat. The distance to the top
edge of the rear bench seat should be
approx. 8 cm.
! Removal is done in the reverse order.
>Note!
If objects are placed on the luggage com!
partment cover when mounted, the cover
may be damaged.
Danger of injury!
The luggage compartment cover
is not intended to secure heavy objects
in the event of an accident.
For this reason, heavy objects must be
tied down. Otherwise, unsecured ob!
jects could be thrown around and cause
injury to you and others.
Danger of injury!
Do not transport any objects by
placing them on the mounted luggage
compartment cover. Objects on the cov!
er could otherwise be thrown around
and injure you and others if you
! brake sharply,
! change direction suddenly,
! are involved in an accident.
!"#$%&$%'&#())*#+#,-.))/-0123456-789:%%;##<=4>=#?.##@4>>A%B6C#DE9#FG1'G&#D)).##/H*?#)/
To Next Page
Loading...
Need help?
General
