7!16 Loading up
Folding down bench seat
Folding down bench seat
Before folding down the bench seat, en!
sure that
! the head restraints are in the lower
position.
! the bench seat is in the furthest for!
ward position.
1 Preparations
! Open the tailgate.
! Slide the front seats to the furthest
forward position to create sufficient
room for manoeuvre.
2 Folding down backrests
! Press down the release lever for the
left!hand rear seat.
! Fold the backrest of the left!hand rear
seat down forwards.
! Proceed likewise with the right!hand
backrest.
>Note!
Steps 3, 4 and 5 are not possible for pure.
3 Releasing bench seat
! Move the bench seat to the furthest for!
ward position and pull the release le!
ver up.
4 Uprighting bench seat
! Once released, the bench seat will piv!
ot upwards largely of its own accord.
5 Locking bench seat
! Lock the bench seat in the vertical po!
sition by engaging the retaining strap
on one of the head restraint posts, and
tighten the belt.
! You can now move the front seats back
into the desired position.
>Note!
It is converted back into the bench seat
in the reverse order.
>Important!
To prevent damage to the seats, never op!
erate the longitudinal adjustment lever
and the release lever simultaneously.
Danger of injury!
Stow the load in such a way that it
does not hinder you when driving.
Do not obstruct your view. With the
front passenger's seat or the bench seat
folded down, do not load above the level
of the upper edge of the door trims.
Place padding over any sharp edges. to
reduce the risk of cuts and abraded tie!
downs.
Danger of injury!
When folding back the bench seat,
ensure that the bench seat and the back!
rests are locked in position.
The occupants of the rear bench seat
could otherwise be injured when the car
is braked.
!"#$%&$%'&#())*#+#,-.))/-0123456-789:%%;##<=4>=#?E##@4>>A%B6C#DE9#FG1'G&#D)).##/H*?#)/
To Next Page
Loading...
Need help?
General
