Helpful hints 9!11
Replacing the bulbs
Changing high beams and parking lights
The high beams and parking lights can be
accessed from the engine compartment.
! Open the front lid.
! Remove the cover cap on the headlight
housing.
>The high beams (A) and parking
lights (B) are inside the headlight
housing.
Changing high beams
! Take hold of the H7 bulb at the plug and
tilt it downwards.
! Remove the bulb from the reflector.
! Release the connector.
! Fit the new H7 bulb. The lug on the side
shield must be pointing upwards.
! Take hold of the bulb at the plug and
tilt it back into the horizontal posi!
tion.
Changing parking lights
The parking lights are located in the re!
flector, below the high beams.
! Take hold of the bulb at its holder with
flat!nosed pliers.
>The bulb is merely slotted into the
holder.
! Remove the bulb from the housing.
>You can slot the new bulb into the
holder.
!"#$%&$%'&#())*#+#,-.))/-0123456-789:%%;##<=4>=#??##@4>>A%B6C#DE9#FG1'G&#D)).##/H*?#)/
To Next Page
Loading...
Need help?
General
