9!32 Helpful hints
Tyres and wheels
Changing a wheel
>Note!
Have the tyres replaced only in a qualified
specialist workshop, such as a smart
center.
Accident risk!
Exceeding the quoted tyre load
capacity and the permissible speed limit
can result in tyre damage or tyre fail!
ure. You could lose control over your
vehicle and cause an accident, injuring
yourself or others as a result.
For this reason, use only the tyre types,
tyre sizes and wheel sizes that are ap!
proved for your type of vehicle. Please
note in particular the customer!spe!
cific approval regulations for tyres.
These regulations may specify the use
of a particular tyre type for your car, or
prohibit the use of certain tyre types
that are permitted in other countries.
The use of a particular type of tyre may
moreover be recommended for certain
regions and areas of use.
Information on tyres is available from
a qualified specialist workshop, e.g. a
smart center.
Accident risk!
After changing a wheel, have the
tightening torque checked by a quali!
fied specialist workshop, e.g. a smart
center. Particularly for safety!rele!
vant work and work on safety!relevant
systems, it is vitally important to use a
qualified specialist workshop such as
a smart center. The wheels could other!
wise work loose if they are not tight!
ened to a torque of 120 Nm. For safety
reasons, use only the correct wheel nuts
approved by smart gmbh.
!"#$%&$%'&#())*#+#,-.))/-0123456-789:%%;##<=4>=#*D##@4>>A%B6C#DE9#FG1'G&#D)).##/H*?#)/
To Next Page
Loading...
Need help?
General
