1!24 Getting acquainted
Seat belts
.
Adjusting seat belt height
To obtain optimum belt run, proceed as
follows:
Adjusting the belt mounting upwards
! Pull the belt mounting (A) up as far as
the desired position.
Adjusting the belt mounting downwards
! Press the release button on the belt
mounting.
! Pull the belt mounting (A) down as far
as the desired position.
! Let go of the release button when in the
desired position.
>The belt mounting engages.
Danger of injury!
Modifications or work performed
inexpertly to a restraint system (seat
belt and anchorages, belt tensioners,
belt force limiters or airbag) or its
wiring and any alterations made to oth!
er networked electronic systems could
result in the restraint systems no long!
er functioning in the manner intended.
Airbags or belt tensioners could
e.g. fail to operate in accidents where
the rate of deceleration exceeds the
tripping threshold, or be activated un!
intentionally. For this reason, never
make modifications to the occupant re!
straint systems. Do not perform any
work on electronic components and
their software without the necessary
expertise.
!"#$%&$%'&#())*#+#,-.))/-0123456-789:%%;##<=4>=#DI##@4>>A%B6C#DE9#FG1'G&#D)).##/H*?#)/
To Next Page
Loading...
Need help?
General
