SMART Joy S2 User Manual

Disposal
30
Indication
Possible Cause
Remedy
The remote control is
not working.
The batteries are used up.
The remote control is aligned
incorrectly.
Replace the batteries with new ones.
Direct the remote control at the front panel
of the receiver.
If a malfunction cannot be eliminated by the above measures, please contact your specialized dealer.
11 Disposal
CAUTION!
 Do not dispose of the receiver and the batteries in normal household refuse!

 Please ask your municipal administration on possibilities for environmentally
friendly and proper disposal of the receiver.
 Please take the batteries to a collecting point.
The WEEE
7
symbol on the product and its packaging states that this product
is an electrics or electronic device. Do not dispose of such device in the
household refuse, but take it to your local municipal collecting point (collec-
tion station).
12 Specifications
12.1 LNB and Tuner Input
F socket IEC 169-24
Input frequency range 950 MHz ~ 2150 MHz
Input level range -65 dBm to -25 dBm
LNB power supply 13/18 V, max. 400 mA
LNB control signal 22 kHz, 0/12 V
DiSEqC control Version 1.2
12.2 Demodulator
Front-end module QPSK
Input data rate 2 MS/s to 45 MS/s
SCPC- and MCPC-capable
12.3 System resources
Processor 216 MHz
SDRAM 16 MBytes
FLASH 4 MBytes
7
WEEE = Waste Electrical and Electronic Equipment. The WEEE directive is the EC directive
2002/96/EC on reduction of the increasing amount of waste from electrical and electronic equipment
not used any more. Its objective is prevention, reduction and environmentally friendly disposal of the
increasing amounts of electronic waste.

SMART Joy S2 Specifications

General

Brand	SMART
Model	Joy S2
Category	Receiver
Language	English