SMART kapp iQ Pro 55 - Audio; Multi-Window

APPENDIX B
REMOTELY MANAGING THE INTERACTIVEFLATPANEL
63 smarttech.com/kb/171000
Audio
Use the following commands to identify audio settings.
Command Response Possible values Standby
mode
get volume volume=[Value] 0–100 No
get mute mute=[Value] on
off
No
get balance balance=[Value] 0–100 No
Use the following commands to assign audio settings.
Command Possible values Response Standby
mode
set volume [Value] + [Incremental value]
- [Incremental value]
=0–100
volume=[Value] No
set mute [Value] =on
=off
mute=[Value] No
set balance [Value] + [Incremental value]
- [Incremental value]
=0–100
balance=[Value] No
set soundreset [Value] =yes soundreset=[Value] No
Multi-Window
Use the following commands to identify Multi-Window settings.
Command Response Possible values Standby
mode
get mw mw=[Value] off
dual
quad
No
get mwaudioinput mwaudioinput=[Value] window1
window2
window3
window4
No
get mwwindow1input mwwindow1input=[Value] hdmi1
hdmi2
displayport
opshdmi
opshdmidisplayport
No