SMART SPNL-6065-V2 - Connecting Power; Connecting to a Network

CHAPTER 3
CONNECTING POWER AND DEVICES
24 smarttech.com/kb/171167
Connecting power
Connect the supplied power cable from the AC power
inlet on the bottom of the display to a power outlet.
NOTE
Refer to the display’s specifications for power requirements and power consumption information
(see More information on page10).
Connecting to a network
The iQ appliance requires a network connection for downloading
software updates, and a number of the iQ appliance’s apps require a
network connection as well. You can connect to a network using a Wi-
Fi connection or the RJ45 jack on the iQ appliance (pictured). For more
information about the iQ appliance’s network connection and
configuration, see Connecting to a network on page33.
NOTE
The above diagram shows the location of the RJ45 jack on the AM40 appliance. See iQ
appliance on page28for the location of the RJ45 jack on your specific iQ appliance model.