Using your SMART Document Camera with your
SMART Table
With your document camera connected to your table, you can capture images directly from the
document camera onto the table’s screen when using applications that support this functionality.
The version of SMART Notebook software that’s installed on your table is 3D-enabled, so youcan
use the Mixed Reality Tools for SMART Document Camera.
Youcan use the document camera's zoom feature from the control panel on the table’s display. Refer
to your SMART Document Camera user’s guide fo
r more information.
To connect your document cam era to your table
1. Verify that your table is on and in Student mode.
2. Connect the USB cable’s USB B plug to your document camera, and then connect the USB A
plug to one of the USB receptacles on the side of the table.
N OTE
There is an optional power cable (Part No. ST-DCC) that can be usedto power the SMART
Document Camera from the table. This cable runs directly from the document camera to the
table and prevents tripping hazards. When this cable is connected, the table powers the
document camera. This cable is used in conjunction with the USB cable that ships with your
SMART document camera, which also runs directly from the document camera to thetable.
For more information on the cable, contact your authorized SMART reseller orgo to
smarttech.
com/wher
e
TI P
Connect thedocument camera's USB cable to the USB receptacle by thePower button on
the table. This provides the most available bandwidth if you’re connecting multiple devices to
your table.
CHAP T E R 2
Using your SMART Table
11
To Next Page
Loading...