Calibrating the table
When you are using SMART Table activities and you or a student touch the table’s surface, a white
dot should appear directly below the touch point. If the dot doesn’t align with your touch point, you
might need to calibrate the table.
N OTE
The size and shape of the white dot depends on the type and size of the contact.
To calibrate the table
1. Turn on the SMART Table collaborative learning center.
The SMART Table Act iv iti es menu appears.
2. Connect your USB drive to your table.
OR
Follow the procedure in Switching modes without inserting a USB drive on page 8.
The menu changes from Student mode to Teacher mode.
3. Press Calibrate.
The first calibration screen appears.
CHAP T E R 3
Maintaining your SMART Table
14
To Next Page
Loading...