Smartgen APC715 - Weichai

APC715 Pump Unit Controller
APC715 Pump Unit Controller ISSUE 2013-08-28 Version 1.0 Page 60 of 62
12.20 WEICHAI
It is suitable for Weichai BOSCH common rail pump engine.
Terminals of controller
Engine port
Remark
Fuel relay output
1.40
Connect to engine ignition lock
Start relay output
1.61
CAN GND
-
CAN communication shielding
line(connect to the controller at
this end only)
CAN(H)
1.35
Impedance 120Ω connecting
line is recommended.
CAN(L)
1.34
Impedance 120Ω connecting
line is recommended.
Engine type: GTSC1
NOTE: If there is any question about connection between controller and ECU
communication, please feel free to contact Smartgen’s service.