Need help?Do you have a question about the Smartgen HGM6120N and is the answer not in the manual?
General| Model | HGM6120N |
|---|---|
| Frequency | 50/60Hz |
| Display | LCD |
| Communication Interface | RS485 |
| Fuel Relay Output | 1 |
| Start Relay Output | 1 |
| Type | Generator Controller |
| DC Supply | 8-35V |
| Operating Temperature | -25°C to +70°C |
| AC Voltage | AC 180V to 277V |
Details the six variants of the HGM6100N controller and lists its main characteristics.
Details automatic start/stop, load transfer, fault display, and protection features.
Lists technical specifications like working voltage, power consumption, and dimensions.
Explains the front panel layout and indicators of HGM6110 and HGM6120.
Details the sequence for automatic starting and stopping of the genset.
Describes how to manually start and stop the genset.
Lists warning conditions that trigger an alarm but not a stop.
Lists shutdown conditions that will stop the genset.
Lists parameters, their ranges, default values, and descriptions.
Guides on how to access and set controller parameters.
Outlines the steps for checking and preparing the controller before operation.
Provides common symptoms and their possible solutions for troubleshooting.
To Next Page