Need help?Do you have a question about the Smartgen HGM6120CAN and is the answer not in the manual?
General| Model | HGM6120CAN |
|---|---|
| Display | LCD |
| Output | Relay Output |
| Communication | CAN, RS485 |
| Power Consumption | < 5W |
| Frequency | 50/60Hz |
| Storage Temperature | -40°C to +85°C |
| Protection Level | IP65 |
| Type | Generator Controller |
| Input Voltage | DC 8-35V |
| Protection Features | Over Voltage, Under Voltage, Over Current |
| Operating Temperature | -25°C to +70°C |
| Humidity | 5~95%RH, Non-condensing |
Details of the function and operation of each control key on the panel.
Overview of the genset controller's front panel interface and indicators.
Explanation of the automatic sequence for starting and stopping the genset.
Procedure for manually starting and stopping the genset.
Procedure to compel the genset to start in manual mode.
List of warning conditions and their descriptions, which trigger alarms but not shutdown.
List of critical alarm conditions that cause the genset to shut down.
Comprehensive table detailing parameter items, their ranges, and default values.
Defines the functions assignable to programmable outputs 1 through 4.
To Next Page