Need help?Do you have a question about the Smartgen HGM6120NC and is the answer not in the manual?
General| Model | HGM6120NC |
|---|---|
| Display | LCD |
| Frequency | 50/60 Hz |
| Programmable Relay Output | 5Amp DC28V |
| Communication Interface | RS485 |
| Input Voltage | 8-35VDC |
| AC Voltage Input (3P4W) | 15 to 300 V(ph-N) |
| Operating Temperature | -25°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Protection Level | IP55 |
| Standby Current | ≤ 50mA |
| Humidity | ≤95% RH (non-condensing) |
Details the function and operation of each key on the controller panel.
Illustrates and labels the front panel layout and indicators of the controller.
Explains the sequence of events for starting and stopping the genset automatically.
Describes how to manually start and stop the genset using the controller.
Outlines the procedure for compelling the genset to start in an emergency.
Lists warning signals that trigger alarms but do not stop the genset.
Details alarm conditions that will cause the genset to stop immediately.
Provides a comprehensive list of parameters, their ranges, and default values.
Explains the possible functions that can be assigned to programmable outputs 1-4.
Guides on selecting the appropriate sensor types for temperature, pressure, and fuel level.
To Next Page