Smartgen HGM6120NC - Page 2

HGM6100N Series Genset Controller User Manual Page 2 of 47
Chinese trademark
English trademark
SmartGen — make your generator smart
SmartGen Technology Co., Ltd.
No.28 Jinsuo Road, Zhengzhou, Henan Province, China
Tel: +86-371-67988888/67981888/67992951
+86-371-67981000(overseas)
Fax: +86-371-67992952
Email: sales@smartgen.cn
Web: www.smartgen.com.cn/
www.smartgen.cn/
All rights reserved. No part of this publication may be reproduced in any material form (including
photocopying or storing in any medium by electronic means or other) without the written permission of
the copyright holder.
Applications for the copyright holder’s written permission to reproduce any part of this publication
should be addressed to SmartGen Technology at the address above.
Any reference to trademarked product names used within this publication is owned by their respective
companies.
SmartGen Technology reserves the right to change the contents of this document without prior notice.
Table 1 – Software Version
Date
Version
Note
2016-06-18
1.0
Original Release
2017-05-22
1.1
Changed back panel picture of controller;
Modified Insulation Intensity description.
2018-08-02
1.2
Configuration parameters were added in table 7;
Modified front panel drawing and keys description.
2019-03-28
1.5
Fixed HGM6110CAN, HGM6120NC application diagram error;
Added configuration parameters of active power loading
percentage;
Fixed crank disconnect conditions conforming to the
controller;
Fixed LCD contrast ratio description;
Fixed Table 5 as Shutdown Alarms;