X10 Toggle Dimmer Switch
This elegant and full-featured switch gives you local control and X10 capabilities for the connected light.
Remotely turn the light on and off from an X10 controller or send commands to other X10 devices when
you use X10 Toggle Dimmer Switch’s toggle. You can also preset an On-Level so the load will fade into
the perfect brightness level every time you turn it on from the toggle.
Switch Toggle
(Top: On/Bright
Bottom: Off/Dim)
Set button
and
Status LED
Wallplate
(sold separately)
Features & Benefits
Replaces a standard light switch in minutes and programs in seconds
Fully X10 compatible to receive commands from any X10 controller
When controlled locally, the switch transmits X10 signals to other devices
Controls incandescent loads up to 600 Watts
Adjustable dim levels with adjustable fade-in/fade-out times
Returns load to either previous dim level or a preset dim level
Status LED indicates setup mode activity and signal transmission
Adjustable LED brightness
3-way and greater lighting circuit capability
90-day warranty
What’s in the Box?
1x - X10 Toggle Dimmer Switch
2x - Mounting screws
4x – Wire nuts
1x - Quick-Start Guide
Page 3 of 9 X10WS467D Rev: 10/7/2011 6:25 PM
To Next Page
Loading...
General