36
pressing the FAV key, and following the same procedure as above to associate a
channel with at least one of the 8 available lists of favorites. An icon with a heart will
appear to the right of the channel. Exit the menu to apply the selected settings. Touch
on the FAV button to select the list of favorite channels. To exit the list of favorites
click on OK and move with the right / left buttons.
▪ Radio Channel List: It is possible, similarly for radio channels, to do the above for
video channels.
▪ Delete all: You can delete all stored channels.
2.3 Installation
To access the menu, press the button MENU and then, using the arrow [Vol+ / Vol-],
select [Installation], click the button OK. Using the arrow [CH + / CH-] you can
watch the menu (Auto Channels Scan, Manual Channels Scan, LCN) and press OK
to open the selected item. Press EXIT to exit the menu.
▪ Manual Channels Scan: You can scan manually. It is strongly recommended to
perform automatic channel scanning.
▪ Auto Channels Scan: Allows automatic channel scanning. It is advisable to select
the Country, FTA mode and Mode T2Signal Only (tick NO, otherwise the decoder
will only search for signals in DVBT2 standard). Highlight the item Search and press
the OK button on the remote control. The tuning process is completely automatic but
can take several minutes. After tuning, you can watch TV.
▪ LCN: Enables or disables the LCN (Logical Channel number). The LCN function allows
to assign a predefined position in the list to each channel / service. Activation is
recommended.
2.4 System Setup
To access the menu, press the button MENU and then, using the arrow [Vol+ / Vol-],
select [System Setup], click the button OK. Using the arrow [CH + / CH-] you can
watch the menu (Language, TV System, Display Setting, Local Time Setting,
Timer Setting, Parental Lock, OSD Setting, Favorite, Other) and press OK to
open the selected item. Press EXIT to exit the menu.
▪ Language: Allows you to select the language used in the OSD, in the Primary /
Secondary Audio and in Teletext.
▪ TV System: In Video Resolution you can choose the resolution used (for TV sets
with the scart select 576, when using HDMI is 720p@50Hz), in Aspect Mode you
can choose the type of image format. If in doubt select Auto (Automatic) while in
Digital Audio Out you can choose the type of audio coding to send to the coaxial
output, if present.
To Next Page
Loading...