SMARTIX DVB-T - Tools and Device Information

38
2.5 Tools
To access the menu, press the button MENU and then, using the arrow [Vol+ / Vol-],
select [Tools], click the button OK. Using the arrow [CH + / CH-] you can watch the
menu (Information, Factory Setting, Upgrade by USB, Auto StandBy) and press
OK to open the selected item. Press EXIT to exit the menu.
▪ Information: Information about the firmware, hardware used by the device is
displayed.
▪ Factory Setting: Allows a reset to the initial conditions.
▪ Update by USB: The device can be updated simply via USB memory. You can
download the firmware on the website, at the product page. Read the file attached to
the FW to perform the correct update. The use of an incorrect update file can lead to
the blocking of the device invalidating the warranty.
The capacity of the integrated CPU is limited and therefore the
use of the contents displayed in the applications could be slowed
and / or inhibited.
Below is a list of the playable files:
● Video Codec: MPEG-2/4 (H.264), VC-1, AVS, AVS+, VPS,
HEVC (H.265)
● Audio Codec: MPEG-1I MPEG-2 layerl/ll, MP3, AAC-LC, WMA,
HE-AAC, WMA, AC-3(Dolby Digitai) E-AC-3 (Dolby Digital Plus),
IEC958 SPDIF
● File Type: TS, MPG, MP4, AVI, MKV, FLV, DIVX
● Resolution: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
● Codec: MPEG-2/4 1080p@30fps CH.264), 1080p@60fps, VC-1
2048*1024p@30fps, AVS /AVS+ 1080p@60fps / VP8
1080p@30fps / HEVC 1080p@60fps