1
This manual contains important instructions for models SBP450UPlus-T,
SBP650UPlus-T, SBP800UPlus-T, SBP1000UPlus-T, SBP1500UPlus-T that should be
followed during installation and maintenance of the UPS and batteries.
Read this manual thoroughly before attempting to unpack, install, or operate your UPS.
CAUTION! To prevent the risk of fire or electric shock, install in a temperature and
humidity controlled indoor area free of conductive contaminants. (See the
specifications for the acceptable temperature and humidity range.)
CAUTION! To reduce the risk of overheating the UPS, do not cover the UPS' cooling
vents and avoid exposing the unit to direct sunlight or installing the unit near heat
emitting appliances such as space heaters or furnaces.
CAUTION! Do not attach non-computer-related items, such as medical
equipment, life-support equipment, microwave ovens, or vacuum cleaners to UPS.
CAUTION! Do not plug the UPS input into its own output.
CAUTION! Do not allow liquids or any foreign object to enter the UPS. Do not place
beverages or any other liquid-containing vessels on or near the unit.
CAUTION! In the event of an emergency, press the OFF button and disconnect the
power cord from the AC power supply to properly disable the UPS.
CAUTION! Do not attach a power strip or surge suppressor to the UPS.
CAUTION! Internal battery voltage is 12Vdc. Sealed, lead-acid, 6-cell battery.
CAUTION! Servicing of batteries should be performed or supervised by personnel
knowledgeable of batteries and the required precautions. Keep unauthorized
personnel away from batteries.
CAUTION! When replacing the batteries, use the same number and type of batteries.
CAUTION! Do not dispose of batteries in a fire. The battery may explode. Do
not open or mutilate the battery or batteries. Released electrolyte is harmful to the skin
and eyes.
CAUTION! Unplug the UPS prior to cleaning and do not use liquid or spray detergent.
CAUTION! A battery can present a risk of electric shock and high short circuit current.
The following precaution should be observed before replacing batteries: (1) Remove
watches, rings, or other metal objects.(2) Use tools with insulated handles.(3) Wear
rubber gloves and boots.(4) Do not lay tools or metal parts on top of batteries. (5)
Disconnect charging source prior to connecting or disconnecting batteries terminal.
• When replacing batteries, replace with the same number of the sealed lead-acid
batteries.
Safety Cautions!
To Next Page
Loading...
