Smartro U80H - Page 27

To Next Page

To Previous Page

Radiated RF

IEC 61000-4-

3 V/m

80MHz to

2.5Ghz

3 V/m

d=1.2 √p 80MHz to 800MHz

d=2.3 √p 80MHz to 2.5GHz

Here P is the maximum

output power rating of the

transmitter in watts (W)

according to the transmitter

manufacturer and d is the

recommended separation

distance in meters (m).Field

strengths from xed RF

transmitters, as determined

by an electromagnetic site

survey.

Should be less than the

compliance level in each

frequency range.

interference may occur in the

vicinity of equipment marked

with the following symbol:

NOTE 1

At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2

These guidelines may not apply in all situations. Electromagnetic

propagation is affected by absorption and reflection from structures,

objects and people.