2
OVERVIEW
The C794IP camera is capable of delivering high quality Digital High Definition (HD) video to your
smart-mobile device(s), which would require higher internet bandwidth. Due to your local
internet environment condition, your mobile device(s) may display black-screen or temporary
disconnect to the C794IP camera.
* Make sure the C794IP camera is operating with sufficient internet bandwidth, 1Mbps (upload/
download speed) is suggested.
* For best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile network
in order to receive maximum download speed.
* When the internet transmission is low, the app will automatically switch to Relay
Mode:
‧ By adjusting to “Better Streaming” in the system setting section may improve the
APP performance.
* Your internet bandwidth is limited. For best performance, avoid more than two users
connecting to the C794IP camera simultaneously.
* Make sure your smart-mobile device(s) is equipped with up-to-date technology, 1.5GHz dual
core processor or equivalent is suggested.
* If the signal strength of your Wi-Fi router is weak, there are several ways to improve range:
‧ Change router/camera relative position to receive better signal.
‧ Use wire Ethernet cable on the C794IP camera to establish connection between
C794IP camera and your router.
‧ Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route.
‧ Switch your router to 11b/11g mode in order to improve router service range.
‧ Purchase extension cable or high gain antenna for your camera from the C794IP
vendor.
* Please make sure the memory card used is CLASS10 rated.
To Next Page
Loading...
Need help?
General
