7
PRODUCT OVERVIEW
Light Sensor
Lan Port
Reset
Antenna
Microphone
LENS
Micro SD Card Slot
Power LED
Power Jack
LED INDICATOR
STATUS DESCRIPTION
Power On Power on the camera and wait until the GREEN LED indicator
becomes steady on. This process would be finished within 45
seconds and make sure the LED is ashing in GREEN.
Soft AP Green LED ashes once followed by 2 short ashes.
Reset factory under Soft
AP
Green LED ashes quicly
Default Reset Green LED ashes quicly
Update Firmware Green LED ashes quicly
Start Recording Video Green LED ashes once
To Next Page
Loading...
Need help?
General
