26
SENSITIVITY SETTING
This denes the camera parameter for motion detection.
Detection Mode
PIR is hardware-based biomass detection.
SOFTWARE use advanced software analysis to trigger motion alarm.
In general, the performance of any PIR depends on the environment, especially the temperature.
At low temperature the accuracy of PIR may suffer. If you are experiencing such, please switch to
the built-in software motion detection to improve the situation.
Motion Detection (available for Software Mode ONLY)
HIGH – Suitable for detecting smaller object(s) within 5 to 6 meters
LOW – Suitable for detecting larger object(s) within 3 to 5 meters
EMAIL SETTING
The email setting allows you to configure the email environment, email account and password.
Gmail account is suggested.
Click the “Use SSL” check box will transmit the data in encryption. This setting requires the Simple
Mail Transfer Protocol (SMTP) conguration. Most ISPs use the SMTP method to transfer outbound
mail via the internet. Only use the SMTP that supports SSL.
Gmail Setting (suggested)
SMTP Server smtp.gmail.com Enter the gmail SMTP server
SMTP Port 465 Enter the SMTP port 465
Username XXX@gmail.com Enter your email address
Password XXXXXXXX Enter the password for this gmail account
Email to XXX@gmail.com Enter the email address for the recipient who
receives the email alert.
Note:
The HIGH/LOW setting for Motion Detection only takes effect when user chooses
SOFTWARE in detection Mode.
To Next Page
Loading...
Need help?
General
