smaXtec Network Cable (not included in delivery scope)
In locations where the smaXtec Base Station will be exposed to wet conditions or
moisture, a special network cable is required for the connection between the
smaXtec Base Station and the network socket. This ensures that the network cable
remains waterproof and dustproof when plugged in. The cable must comply with
norm TIA/EIA-568-B (with regard to length, bending radius etc.).
Image: Network cable (5/10/20 m | 16/32/65 ft)
The network cable can be ordered directly from smaXtec animal care or from your
distributor in the following lengths: 5/10/20 m (16/32/65 ft).
Power Supply – included mains adapter
The smaXtec Base Station is powered via the mains adapter provided. Only use this
mains adapter for installation purposes. At the end of the cable there is a specially
designed plug to protect the smaXtec Base Station from water and dust. Connect the
mains adapter to the socket on the left-hand side of the smaXtec Base Station and
tighten the screw caps. The mains adapter itself does not conform to an IP standard
with regard to protection against water, i.e. the mains adapter must not be exposed
to rain or moisture.
Image: Mains adapter (3 m/10 ft cable)
Specifications of the adapter:
• Manufacturer: SUNNY Computer Technology Europe, s.r.o.
• Input: 100-240 V ~, 0.5 A MAX, 50-60 Hz
• Output: 5 V --- 2.0 A
To Next Page
Loading...