The LEDs in detail:
Power LED:
• Flashing yellow: Starting up
• Glowing green: Started up/OK
• Flashing red/red: Error
Link LED:
• Flashing yellow: Connecting (depending on use of Ethernet or GSM this can
take upto 10 minutes)
• Glowing green: Connected to the internet
• Flashing red/red: No connection to the server (via Ethernet/GSM)
Data LED:
• Flashing green: Data is being read out from the smaXtec Sensors
5.2. smaXtec Repeater
In certain configurations we recommend that you use a smaXtec Repeater (to ensure
coverage of various areas of the cow shed). This enables an easy and low-cost
extension of the smaXtec wireless network and communication with the smaXtec
Sensors.
Scope of Delivery
The smaXtec Repeater packaging contains the following items:
• 1x smaXtec Repeater
• 1x mains adapter (3 m/10 ft cable length)
• 4x screws and 4x wall plugs for mounting
• 1x Drill template
• 1x Quickstart Guide
Should one of these items be missing or damaged, please contact your smaXtec
distributor or contact smaXtec directly. Please retain the box and the original
packaging material in case you need to return the product for repairs at a later date.
To Next Page
Loading...