6. smaXtec Software
6.1. smaXtec Messenger
Actionable alerts with smaXtec Messenger. Monitoring of data in real-time means
that you are kept fully informed at all times about the current health status of your
animals. The smaXtec Messenger sends you immediate alerts if there are significant
changes in rumen pH, temperature or activity levels. The suggested actions
contained in the alert messages enable a rapid and targeted response – for example
by adjusting feed quantities or contacting your veterinarian.
The suggested actions and physiological data can be accessed in real-time via PC,
tablet or smartphone from the smaXtec server. Where necessary you automatically
receive an actionable alert message. You are kept easily updated with all relevant
information. This means curves no longer have to be looked at or interpreted.
Caution: For display of temperature events, measurement data must be
available from over a minimum of 4 days.
6.1.1. Initial Steps
Start your browser, go to https://messenger.smaxtec.com and log in with your user
name and password. Before using for the first time you need to register and set up
an account for your farm. Please use a valid email address.
The most important steps for successful use of smaXtec Messenger are described
below:
1. Setting up a smaXtec Messenger user account
Start your browser, go to https://messenger.smaxtec.com and register with your
email address and password. Please use a valid email address at registration.
2. Activating a sensor
Activation in smaXtec Messenger – menu item „Animals“: Sensor activation is
required to ensure the sensor can be correctly assigned to the user and used in
smaXtec Messenger.
3. Activating a device
Activation in smaXtec Messenger – menu item “Devices”: Device activation is
required to ensure the device can be correctly assigned to the user and used in
smaXtec Messenger.
4. Working with smaXtec Messenger
Following successful activation of devices (smaXtec Base Station, Repeater,
Sensors) you can manage your cows, view important events and manage alerts.
To Next Page
Loading...