Smaxtec Classic - 5 Smaxtec Read-Out Devices; Smaxtec Base Station

5. smaXtec Read-Out Devices
5.1. smaXtec Base Station
The smaXtec Base Station automatically receives the relevant data. The data can be
transmitted via the in-house network (Ethernet cable required) or via GSM (technical
standard for mobile communications).
Scope of delivery
The smaXtec Base Station package contains the following
components:
• 1x smaXtec Base Station
• 1x magnet with tag (required for switching the sensors
on)
• 1x mains adapter (with 3 m/10 ft cable)
• 4x screws and 4x wall plugs for mounting
• 1x Drill template
• 1x optional GSM antenna
• 1x Quickstart-Guide
Should any of these components be missing or damaged, please contact your
smaXtec distributor or smaXtec. Please retain the box and the original packaging
materials in case you need to return the product for any reason (e.g. repairs) in the
future.
The smaXtec Base Station features the following status LEDs (top left):
Power LED:
• Indicates if the smaXtec Base Station is on.
Link LED:
• Indicates the status of the connection to the server.
Data LED:
• Indicates if data from smaXtec sensors is being read out.
On the right side of the smaXtec Base Station there is a GSM antenna and on the left
you will find the socket for the network cable and the power supply. This is where the
mains adapter (included in delivery) is connected during installation. The smaXtec
Base Station must also be connected to the network via a network cable or an
optional GSM antenna used.