6.2 | Advanced Setup
Below is an outline of the Advanced Setup section. This section is used to manually configure your
ISP connection and also define the advanced system parameters, manage and control the Barricade
and its ports, or monitor network conditions.
6.2.1 | System
This section is used to configure the local time zone, password for administrator access, and the IP
address of a PC that will be allowed to manage the Barricade remotely.
• Time Zone
Use this option to configure the time zone for the Barricade. This information is used for log
entries and client access control.
There are 3 options to configure the Router’s internal clock:
o
Using preset or custom NTP servers
o Using your computer system’s clock
o Manually configure the Time and Date
To Next Page
Loading...
