Configuring the Wireless Barricade g Router
68
URL Blocking
To configure the URL Blocking feature, use the table below to
specify the web sites (e.g. www.somesite.com) and/or keywords
you want to filter on your network.
To complete this configuration, you will need to create or modify
an access rule in “Access Control” on page 65. To modify an
existing rule, click the Edit option next to the rule you want to
modify. To create a new rule, click on the Add PC option.
From the Access Control Add PC section check the option for
“WWW with URL Blocking” in the Client PC Service table to filter
out the web sites and keywords specified below.
Use the above screen to block access to web sites or to web
URLs containing the keywords specified in the keyword table.
To Next Page
Loading...
Need help?
General
