SMC Networks SMC Barricade SMC7004VWBR

Questions and Answers:

B
brianawilsonJul 31, 2025
How to fix SMC Networks Wireless Router when the Power LED is OFF?
- X
  xyatesJul 31, 2025
  If the power LED is off on your SMC Networks Wireless Router, start by checking the connections between the router, the external power supply, and the wall outlet. If the power indicator remains off after plugging in the power cord, there might be an issue with the power outlet, power cord, or the external power supply itself. Also, if the unit powers off after running, inspect for loose power connections, power losses, or surges at the outlet. If you still cannot find the problem, the external power supply might be defective.
A
Alexander FreyAug 5, 2025
What to do if cannot ping SMC Networks Wireless Router from LAN?
- C
  Crystal DavisAug 5, 2025
  If you cannot ping the SMC Networks Wireless Router from the attached LAN, or it cannot ping any device on the attached LAN, verify that the IP addresses are properly configured. For most setups, using the router’s DHCP function to dynamically assign IP addresses to clients on the LAN is recommended. However, if you manually configure IP addresses, ensure that the same network address and subnet mask are used for both the router and the LAN devices. Also, ensure that the devices you are trying to ping have been configured for TCP/IP.
B
bgomezAug 11, 2025
Why I cannot connect to SMC Networks SMC Barricade SMC7004VWBR using the web browser?
- J
  Jennifer GibsonAug 11, 2025
  If you cannot connect to the SMC Networks Wireless Router using a web browser, ensure that the router is configured with a valid IP address, subnet mask, and default gateway. Also, check that you have a valid network connection to the router and that the port you are using has not been disabled. Finally, inspect the network cabling between your computer and the router.
R
Ross JensenAug 17, 2025
What to do if Link LED is OFF on SMC Networks SMC Barricade SMC7004VWBR?
- V
  vfoxAug 17, 2025
  If the Link LED is off on your SMC Networks Wireless Router, verify that both the router and the attached device are powered on. Ensure that the cable is securely plugged into both the router and the corresponding device. Confirm that you are using the correct cable type and that its length does not exceed specified limits. Check that the network interface on the attached device is configured for the proper communication speed and duplex mode. Inspect the adapter on the attached device and cable connections for any defects, and replace any defective adapter or cable if needed.
A
Amanda TapiaAug 23, 2025
How to reset SMC Networks Wireless Router if I forgot the password?
- L
  Lindsey MontesAug 23, 2025
  If you forgot or lost the password for your SMC Networks Wireless Router, press the Reset button on the front panel and hold it down for at least five seconds. This will restore the router to its factory default settings.

SMC Networks SMC Barricade SMC7004VWBR Specifications

General

Wireless Standard	IEEE 802.11b
Frequency Band	2.4 GHz
Antenna Type	External
Data Link Protocol	Ethernet, Fast Ethernet, IEEE 802.11b
Wireless Protocol	802.11b
Compliant Standards	IEEE 802.11b, IEEE 802.3, IEEE 802.3u
Wireless Data Rates	Up to 11 Mbps
Weight	0.7 lbs
Ports	4 x 10/100Base-TX
WAN Port	1 x 10/100Base-TX
Security	WEP, WPA
Power Supply	External
Connectivity Technology	Wireless, Wired
Encryption Algorithm	64-bit WEP, 128-bit WEP, WPA
Features	DHCP server, NAT support, VPN passthrough
Firewall	NAT, SPI