C
ONFIGURING
C
LIENT
TCP/IP
5-7
Windows XP
1. Click the “start” button and choose “Control Panel.”
2. Select the “Network and Internet Connections” icon, then
click the “Network Connections” icon, and double click on
the “LAN or High-Speed Internet.”
3. Press the “Properties” button in the “General” tab.
4. Select the TCP/IP line that has been assigned to your network card in
the “Local Area Connection Properties” window.
5. Click the “Properties” button to set the TCP/IP protocol for the
Wireless Barricade.
6. You can dynamically assign TCP/IP address settings to a client, or you
can manually configure a client with address settings to meet your
specific network requirements. (Note that the default IP address of the
Wireless Barricade is 192.168.2.1.)
To Next Page
Loading...
