I
NSTALLATION
2-4
Rear Panel
Figure 2-2. Rear Panel
Item Description
9V 1A Connect the included power adapter to this port.
Warning: Using the wrong type of power adapter may cause
damage.
Reset Use this button to reset the power or restore the default factory
settings. Reboot by pushing 1 second. Return all settings to the
factory defaults by pushing 5 seconds.
WAN WAN port (RJ-45). Connect a cable modem, DSL modem, or an
Ethernet router to this port.
LAN Four 10/100 Autosensing switch ports (RJ-45). Connect devices on
your local area network to these ports (such as a PC, hub, or switch).
RESET
9V
2 A MAX
To Next Page
Loading...
