Need help?Do you have a question about the SMC Networks FS5 and is the answer not in the manual?
General| Brand | SMC Networks |
|---|---|
| Model | FS5 |
| Category | Switch |
| Language | English |
Legal information regarding registered trademarks and company names of SMC and other entities.
Details SMC's product warranty terms, coverage, repair/replacement policies, and upgrade eligibility.
Outlines that SMC's stated warranties and remedies are exclusive and in lieu of all others.
Explains compliance with FCC Rules Part 15 for Class B digital devices and measures to correct interference.
Details compliance with EC directives for Electromagnetic Compatibility and safety standards.
States compliance with Canadian standards for radio noise emissions from digital apparatus.
Covers product limitations, installation by qualified personnel, and electrostatic discharge precautions.
Provides guidance on proper power connections, cable types, and RJ-45 port usage to avoid damage.
Details safety information regarding the use of lasers for signal transmission and eye safety.
Information on product recyclability and disposal procedures at the end of its service life.
Confirms that the product is manufactured without hazardous or ozone-depleting materials.
Notes that printed documentation uses biodegradable paper and non-toxic inks for environmental responsibility.
Explains that the guide details hardware features, characteristics, and installation procedures for the switch.
Identifies the intended audience as network administrators with basic LAN knowledge.
Specifies required cord set attributes for UL/CSA certification and electrical safety compliance.
Provides an overview of the EZ Switch 10/100's hardware, including ports and capabilities.
Lists key features such as auto-negotiation, plug-and-play operation, and MDI/MDI-X support.
Explains the function of the Power and Link/Activity LEDs for system status monitoring.
Describes the RJ-45 ports with built-in crossover and the DC power connector on the switch's rear.
Lists all components included in the EZ Switch 10/100 package, such as the switch, adapter, and guide.
Provides guidelines for choosing an optimal location for the switch based on accessibility and environment.
Step-by-step instructions for positioning, powering, and connecting the switch to the network.
Addresses issues related to the Power LED not lighting up, including probable causes and solutions.
Addresses issues where the Link LED does not illuminate, covering causes and troubleshooting steps.
To Next Page