Need help?Do you have a question about the SMC Networks ZSE80(F) and is the answer not in the manual?
General| Brand | SMC Networks |
|---|---|
| Model | ZSE80(F) |
| Category | Switch |
| Language | English |
Explains warranty terms and conditions for the product.
Outlines restrictions for product use in specific industries.
Details how to interpret model numbers based on specifications and order.
Lists available output types and their characteristics.
Describes different port types and their corresponding models.
Identifies and describes the physical parts of the pressure switch.
Defines key terms and concepts used in the manual.
Details how to mount the product using different bracket types.
Instructions for installing using panel mount adapters A and B.
Specifies cutout dimensions for individual and multi-unit installations.
Instructions for connecting screw-type piping and tightening torque.
How to attach tubes to the air-relieving port for protection.
General guidelines for making electrical connections safely.
Illustrates internal circuits and wiring configurations for various output types.
The basic mode for pressure detection, indication, and switch function operation.
Explains how the pressure switch operates in hysteresis mode.
How to enter and navigate the function selection menu.
Information on the factory default settings for various functions.
How to change the pressure unit displayed on the device.
Selects between hysteresis or window comparator modes for output.
Configures the output logic to be normal or reversed.
Sets the ON/OFF points for the switch output.
Adjusts hysteresis to prevent chattering.
Configures output mode, reversed output, pressure, and hysteresis for OUT2.
Selects the response time to prevent output chattering.
Selects between analog output or auto-shift input functions.
Configures auto-shift function, including auto-shift zero.
Changes the pressure display digit and eliminates flickering.
Manually adjusts the displayed pressure value within ±5% R.D.
Resets the fine adjustment of the displayed value.
Automatically calculates and memorizes optimal pressure values for hysteresis mode.
Enables or disables the power saving mode.
Enables or disables the security code feature to lock settings.
Enables or disables all functions in series.
Displays the maximum and minimum pressure values recorded.
Adjusts the displayed value to zero.
Prevents unintended changes to set values by locking the buttons.
Information on product behavior and safety during power interruptions.
Steps to follow when the security code is lost.
A flowchart to diagnose and resolve common operational issues.
Detailed troubleshooting steps for output and response issues.
Detailed troubleshooting for analog output, errors, indicator, and multi-switch issues.
Detailed troubleshooting for accuracy, unit changes, buttons, and operation stability.
Provides a detailed breakdown of the product's technical specifications.
Details port sizes, mass, and leakage for various models.
Shows voltage and current output characteristics graphically.
To Next Page