SMC Networks ZSE80(F) User Manual

-38-
PS##-OMM0003-A
■Special function setting
■[F98] Setting of all functions
All functions can be set in series.
<Operation>
Press the
or button in function selection mode to display [F98].
Press the
button.
Move on to setting of all functions.
[on] (enabled) selected
Setting of each function
∗1
[oFF] (disabled) selected
Press the
button to
set.
Return to function
selection mode.
After the change to
[oFF] (disabled),
press the
button
to set.
Return to function
selection mode.
Press the
button for
2 seconds or
longer.
∗1: Setting of functions
Every time
button is pressed, function turns in order of "Function of setting" on page 39.
Set by
or button.
Refer to each relevant paragraph for further details of the setting.
Setting of all functions
[ALL] and set value are displayed in turn.
Press the
or button to select all functions.
[F98] setting of all functions completed
Measurement mode

SMC Networks ZSE80(F) Specifications

General

Brand	SMC Networks
Model	ZSE80(F)
Category	Switch
Language	English