SMC Networks ZSE80(F) User Manual

-30-
PS##-OMM0003-A
■[F 4] Setting of analog output/auto-shift input
Auto-shift function
This function is available when analog output/ auto-shift is equipped.
Auto-shift: Function to perform output to relative change referring to the pressure when signal is input.
Auto-shift zero: Function to perform output to relative change and clear the display value to zero referring to
the pressure when signal is input.
<Operation>
Press the
or button in function selection mode to display [F 4].
Press the
button.
Move on to setting of function.
Press the button to set.
Move on to auto-shift function
setting when auto-shift input is
selected.
Press the
button to set.
Setting of function
Press the
or button to select function.
Setting of auto-shift function
Press the
or button to
select auto-shift function.
Move on to setting of effective
output.
Return to function selection
mode when analog output is
selected.

SMC Networks ZSE80(F) Specifications

General

Brand	SMC Networks
Model	ZSE80(F)
Category	Switch
Language	English