Need help?Do you have a question about the SMC Networks ZK2-ZSV-A Series and is the answer not in the manual?
General| Input Voltage | 100-240VAC, 50/60Hz |
|---|---|
| Jumbo Frame Support | 9K |
| Power over Ethernet | Yes |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 10% to 90% non-condensing |
Details the warranty period, conditions, and limitations for the product.
Lists prohibitions on product use for weapons and export regulations.
Instructions on how to install the product, including tightening torque.
Guidelines for connecting the pressure switch, including power and routing.
Instructions for connecting and disconnecting the pressure switch connector.
Explains the product model designation and how to specify it when ordering.
Details the model indication for integrated cable assemblies.
Instructions for mounting the pressure switch to the ejector body, including torque specifications.
Describes the basic mode for pressure detection, indication, and switch function operation.
Explains how to enter and exit the function setting mode.
Lists the default settings for various functions of the product.
Explains how to display and reset the maximum/minimum vacuum pressure values.
Describes how to adjust the displayed value to zero.
Details the key-lock function to prevent unintentional changes to settings.
Explains how to change switch settings to stop energy-saving control.
Instructions for resetting the product after power interruptions.
Provides a cross-reference table for troubleshooting errors and their possible causes and countermeasures.
Details the cause and troubleshooting for over current errors.
Explains zero-clear errors and their resolution.
Describes errors related to exceeding pressure limits.
Covers system errors related to internal data or hardware issues.
To Next Page