SMC Networks ZK2-ZSV-A Series

-41-
NO.ZK2-OM00501-B
■[F99] Reset to the default setting
If the setting of the pressure switch becomes unknown, the default setting can be restored.
<Operation>
Press the or button in function selection mode to display [F 99].
Press the button. Move on to reset to the default setting.
All settings are returned to the
default values. Return to
function selection mode.
[oFF] (unused) selected.
Press the button to
confirm selection.
Return to the function
selection mode.
Setting of [F99] Reset to the default setting completed
Reset to the default setting
Set the display [ON] by pressing the or button,
then press the and buttons simultaneously for 5
seconds or longer.