SMC Networks ZK2-ZSV-A Series - F0 Unit Selection Function

-24-
NO.ZK2-OM00501-B
■[F 0] Unit selection function
Setting is only possible when using a product with the unit selection function.
(kPa/MPa can still be selected if the product does not have the unit selection function.)
<Operation>
Press the or button in function selection mode to display [F 0].
Press the button. Move on to select the display unit.
Press the button to set. Return to function selection mode.
Setting of [F 0] Unit selection function completed.
Display unit and minimum setting unit.
Unit
MPa
kPa
kgf/cm
2
bar
psi
InHg
mmHg
0.001
0.1
0.001
0.001
0.02
0.1
1
Selection of the display unit
Press the or button to select the display unit.