SMC Networks ZK2-ZSV-A Series User Manual

-34-
NO.ZK2-OM00501-B
■[F80] Power saving mode
Power saving mode is selectable.
When selected and no buttons are pressed for 30 seconds, the pressure switch will shift to power saving
mode.
The default setting is normal mode (power saving mode off).
<Operation>
Press the or button in function selection mode to display [F80].
Press the button. Move on to setting of power saving mode.
Press the button to set. Return to function selection mode.
Setting of [F80] Power saving mode completed.
Power saving mode 1 remains enabled until turned off.
In power saving mode 1, the brightness of the whole display is reduced.
In power saving mode 2, when buttons are pressed the display is normal, but if no buttons are pressed for
30 seconds, it will revert to power saving mode. (Power saving is only enabled in measurement mode).
In power saving mode 2, a decimal point flashes and moves across the display.
(In saving mode 2, a decimal point flashes and modes across the display.)
Setting of power saving mode
Press the
or
button to select power saving mode.

SMC Networks ZK2-ZSV-A Series Specifications

General

Brand	SMC Networks
Model	ZK2-ZSV-A Series
Category	Switch
Language	English