SMC Networks ZK2-ZSV-A Series

-35-
NO.ZK2-OM00501-B
■[F81] Security code
A security code can be selected, which must be entered to unlock the keys when the keys are locked.
In the default setting, entry of a security code number is not required.
<Operation>
Press the or button in function selection mode to display [F81].
Press the button. Move on to setting of security code.
Press the button to set. Return to function selection mode.
Setting of [F81] Security code complete.
If the security code is used, it becomes necessary to enter the security code to release the key lock.
The security code number can be set to a different value by an operator.
The default setting is "000".
Refer to page 44 or details of operation when the security code is used.
Setting of security code
Press the or button to select security code.