SMC Networks ZSE30AF-#-#-X576

Need help?

Do you have a question about the SMC Networks ZSE30AF-#-#-X576 and is the answer not in the manual?

SMC Networks ZSE30AF-#-#-X576 Specifications

General

Power over Ethernet (PoE)	Yes
PoE Standards	IEEE 802.3af/at
Jumbo Frame Support	9K
Features	VLAN, QoS, IGMP Snooping, Link Aggregation
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% non-condensing

Summary

Safety Instructions

General Safety Instructions

Basic safety rules and hazard level definitions.

Specific Safety Conditions

Conditions requiring special safety considerations.

Product Warranty and Compliance

Operator and Safety Precautions

Warning Precautions

Critical warnings for safe operation and maintenance.

Handling and Design Notes

Caution Precautions

Safety warnings for handling and electrical connections.

Product Handling Guidelines

Product Installation

Instructions for physical mounting and setup.

Product Wiring

Procedures for electrical connections and cable routing.

Operation and Maintenance

Adjustment and Operation

Guidance on setting parameters and operating the device.

Mounting and Installation

Mounting with Brackets

Instructions for attaching mounting brackets.

Mounting and Installation (continued)

Mounting with Panel Mount Adapter

Instructions for using panel mount adapters.

Wiring and Connections

Electrical Connection

Guidelines for connecting the product to power and circuits.

Wiring Examples (Part 1)

Wiring Examples (NPNPNP 12 Outputs)

Circuit diagrams for NPN/PNP output configurations.

Wiring Examples (Part 2)

Wiring Examples (Analog Outputs)

Circuit diagrams for analog output configurations.

Pressure Setting

Measurement Mode Operation

How the device operates in measurement mode and sets pressure.

Pressure Setting (continued)

Setting Pressure Values

Step-by-step guide to setting pressure thresholds.

Function Setting

Entering Function Selection Mode

How to navigate to and use the function setting menu.

Function Settings Overview

Setting Output 1 (OUT1)

Configuration options for the first output.

Setting Output 2 (OUT2)

Configuration options for the second output.

Setting Output 1 (OUT1)

Output Mode and Reversed Output Settings

Configuring output mode and reversed output behavior.

Setting Output 1 (OUT1) (continued)

Hysteresis and Display Colour Settings

Adjusting hysteresis and display color for outputs.

Setting Output 2 (OUT2)

OUT2 Setting Overview

Response Time Settings

Digital Filter Settings

Delay Time Settings

Response Time Settings (continued)

Digital Filter Operation

Delay Time Operation

Auto-Preset Function

Auto-Preset Operation

Auto-Preset Function (continued)

Auto-Preset Procedure

Security Code Function

Security Code and Key Lock

Special Function Settings

Setting All Functions

Copy Function

Copy Function Operation

Copy Function (continued)

Copy Function Process

Output Check

Output Check Operation (OUT1)

Output Check (continued)

Output Check Operation (OUT2)

Other Settings (Part 2)

Key Lock Operation with Security Code

Forgotten Security Code Recovery

Troubleshooting Guide