SMC Networks ZSE30AF-#-#-X576 - Setting Output 2 (OUT2); OUT2 Setting Overview

-28-
No.PS※※-OMV1001
■[F 2] Setting of OUT2
Set output method of OUT2.
The display colour is linked to the setting of OUT1, and can not be set for OUT2
<Operation>
Press the or button in function selection mode to display [F 2].
Press the button Moves on to setting of output mode
Set [F 2] based on [F 1] setting of OUT1 (page 25 to 27)
: If there is only 1 output or the analogue output is used, the display indicates [---], and this function cannot be set.