Improved Operability
∗Select from 1.5 ms or less, 20 ms, 100 ms, 500 ms, 1000 ms, 2000 ms or 5000 ms.
Delay Time
Current Consumption
∗Reduced by approx. 60 % in power saving mode.
Fastest
1.5
ms
∗
or less
25
mA
∗
or less
Page 2
3 Setting Modes
q
3 Step Setting Mode
w
Simple Setting Mode
e
Function Selection (detailed setting) Mode
With a snapshot
function for measured
value reading
Push Push
Completion of setting
Start of setting
Release the button after “---” is
displayed on the right side sub screen.
Pressing the and buttons for a
minimum of 1 second will make the set value (threshold
value) the same as the current pressure value.
While checking the measured value,
Measured value (Current pressure value)
Main screen
setting is possible.
Label (Display item), Set value (Threshold value)
Sub screen
Visualisation of Setting Items
Set value (Threshold value)
Hysteresis value
Delay time
Peak value
Bottom value
Snap
shot
function
CAT.EUS100-114A-UK
Series ZSE20(F)/ISE20
High-Precision
Digital Pressure Switch
3-Screen Display
IP40
RoHS
New
New
To Next Page
Need help?
General
