Mode Examples
Easy Screen Switching
Visualisation of Setting Items
Simple 3 Step Setting
When S button is pressed, and the set
value (P_1) is being displayed, the set
value (Trigger level) can be set. When
S button is pressed, and the hysteresis
(H_1) is being displayed, the hysteresis
can be set.
∗
One arbitrary display mode can be added by setting the function. (Refer to page 3.)
Hysteresis mode
Window comparator mode
1 2 3
Push Push
Completion of setting
Adjust to the set value by the
or button.
Sub screen (label)
shows the item
to be set.
Setting is possible while checking the measured value.
Set value (Threshold value)
Hysteresis value Bottom value Peak value
Improved Operability
The sub screen can be switched by pressing up/down buttons.
Measured value (Current pressure value)
Main screen
Set value (Threshold value)
Sub screen/Right side
Label (Display item)
Sub screen/Left side
Current modelZSE20(F)/ISE20
Displays
in turn.
Normal output
Set value (Threshold value)
Normal output/Lo side
Set value (Threshold value)
Reversed output
Set value (Threshold value)
Normal output/Hi side
Set value (Threshold value)
Hysteresis
Set hysteresis value
Reversed output/Lo side
Set value (Threshold value)
Reversed output/Hi side
Set value (Threshold value)
Always
displayed
in one
screen.
New
1
Series ZSE20(F)/ISE20
To Next Page
Loading...
Need help?
General
