SMC Networks ZSE30AF-#-#-X576

-26-
No.PS※※-OMV1001
Press the button to set. Move on to setting of display colour.
Press the button to set. Return to function selection mode.
Setting of [F 1] operation of OUT1 completed
1: The selected parameter becomes effective after pressing the button.
2: After setting, it is possible to move to measurement mode by pressing the button for 2 seconds or longer.
Setting of Hysteresis
Press the
or
button to select hysteresis.
Selection of display colour
Press the
or
button to select display colour.