HRX-OM-K003
Chapter 1 Safety
HRW Series 1.5 Safety Measures
1.5.2 Safety Interlock system
Safety Interlock system
The function of the safety interlock system is not only protect personnel by
restricting operation that may cause damage to this system or the facility around it
but also eliminate the danger relating to safety. This system is outfitted with
several interlock functions that are activated when improper operation or hazardous
conditions occur. System operation shall be terminated when a safety interlock is
activated
An alarm message is displayed on the LCD screen when a safety interlock is
activated. See “Chapter 6 Error Message and Troubleshooting” for details on the
alarms and remedies or see section “Troubleshooting” in a separate volume of the
“Service Manual”.
Front panel
System repair may require the removal of the front panel.
The breaker handle operation is available only with the front panel attached.
To Next Page
Loading...
