SMC Networks LEC-W2 User Manual

4
(7) The following display appears when installation is completed. Click the "Close".
(8) Display the "Device Manager" again.
Confirm that the "SMC Serial Converter" (Part A in the lower figure) was added to the "Universal
Serial Bus controllers".
Then, right-click the "USB Serial Port" (Part B in the lower figure) in the "Other devices", and
select the "Update Driver Software". Install it again following the same procedure from (4) to (7).
[A]
[B]

SMC Networks LEC-W2 Specifications

General

Brand	SMC Networks
Model	LEC-W2
Category	Controller
Language	English