SMC Networks SMC Barricade g SMC7904WBRA2 - Page 22

3-1
C HAPTER 3
C ONFIGURING C LIENT PC
After completing hardware setup by connecting all your network devices,
you need to configure your computer to connect to the Barricade.
See:
“Windows 98/Me” on page 3-2
“Windows NT 4.0” on page 3-7
“Windows 2000” on page 3-11
“Windows XP” on page 3-14
or
“Configuring Your Macintosh Computer” on page 3-16
depending on your operating system.