C
ONFIGURATION
P
ARAMETERS
4-23
ATM PVC
Enter the ATM (Asynchronous Transfer Mode) virtual connection
parameters here.
Parameter Description
VC1 - VC8 Click on the desired VC to set the values for the connection.
In most cases you ISP will provide a single VC. For single
VC use VC1.
VPI/VCI Displays Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) configured for corresponding VC.
Encapsulation Displays Encapsulation configured for corresponding VC.
• VC-MUX: Point-to-Point Protocol over ATM Virtual
Circuit Multiplexer (null encapsulation) allows only
one protocol running per virtual circuit with less
overhead.
• LLC: Point-to-Point Protocol over ATM Logical Link
Control (LLC) allows multiple protocols running over
one virtual circuit (using slightly more overhead).
Protocol Displays protocol configured for corresponding VC.
To Next Page
Loading...
